ASTM A563M Nuts Carbon and Alloy Steel

/ASTM A563M Nuts Carbon and Alloy Steel
  • ASTM A563M Nuts Carbon and Alloy Steel

ASTM A563M Nuts Carbon and Alloy Steel, ASTM A563 & A563M HEAVY HEX NUT, ASTM A194 gr 2H hex heavy nut, Easy To Install Nut/Bolt Astm A563 Gr Dh Heavy Hex Clevis Nut, ISO 4775 Hexagon Nuts for stuctural, High tensile nuts for steel construction

ASTM A563M Nuts Carbon and Alloy Steel, ASTM A563 & A563M HEAVY HEX NUT
Size
½”, ¾”, 5/8”, 7/8”, 1”, 1-1/4”, 1-1/2”, 1-1/8”, 1-3/4”, 2”, 2-1/4”, 2-1/2”, 2- ¾”, 3”, M10, M12, M14, M16, M18, M20, M22, M24, M27, M30, M33, M36, M39, M42, M45, M48, M52, M56, M60, M64, M68, M72
Classs
8S, 10S
Finish
Black, Decromat, Electro Galvanized B633, HDG, Greenkote, Self Finish, Yellow (Cadmiun)

This ASTM A563 and ASTM A563M heavy hex nuts specification covers chemical and mechanical requirements for eight property classes of hex and hex-flange carbon and alloy steel nuts for general structural and mechanical uses on bolts, studs, and other externally threaded parts.

Note 1: Throughout this specification, the term class means property class.
Note 2: Requirements for the four classes 5, 9, 10, and 12 are essentially identical with requirements given for these classes in ISO 898/II. Requirements for Classes 8S and 10S are essentially identical with requirements in an ISO 4775 Hexagon Nuts for High-Strength Structural Bolting with Large Width Across Flats, Product Grade B, Property Classes 8 and 10. Classes 8S3 and 10S3 are not recognized in ISO standards.

This specification covers chemical and mechanical requirements for eight property classes of hex and hex-flange carbon and alloy steel nuts for general structural and mechanical uses on bolts, studs, and other externally threaded parts. Materials shall be tested and the individual grades shall conform to specified values of material such as hardness and proof load, chemical, and mechanical requirements. Classes 8S3 and 10S3 nuts have atmospheric corrosion resistance and weathering characteristics comparable to those of the steels. The atmospheric corrosion resistance of these steels is substantially better than that of carbon steel with or without copper addition. When properly exposed to the atmosphere, these steels can be used bare (uncoated) for many applications.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope
1.1 This specification covers chemical and mechanical requirements for eight property classes of hex and hex-flange carbon and alloy steel nuts for general structural and mechanical uses on bolts, studs, and other externally threaded parts.
Note 1—Throughout this specification, the term class means property class.
Note 2—Requirements for the four classes 5, 9, 10, and 12 are essentially identical with requirements given for these classes in ISO 898/II. Requirements for Classes 8S and 10S are essentially identical with requirements in an ISO 4775 Hexagon Nuts for High-Strength Structural Bolting with Large Width Across Flats, Product Grade B, Property Classes 8 and 10. Classes 8S3 and 10S3 are not recognized in ISO standards.
1.2 Classes 8S3 and 10S3 nuts have atmospheric corrosion resistance and weathering characteristics comparable to those of the steels covered in Specification A588/A588M. The atmospheric corrosion resistance of these steels is substantially better than that of carbon steel with or without copper addition (see 6.2). When properly exposed to the atmosphere, these steels can be used bare (uncoated) for many applications.
1.3 The nut size range for which each class is applicable is given in the table on mechanical requirements.
1.4 Appendix X1 gives guidance to assist designers and purchasers in the selection of a suitable class.
1.5 Appendix X2 gives data on the properties of slotted hex nuts and hex jam nuts.
1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
Note 3—This specification is the metric companion of Specification A563. ASTM A563M Heavy Hex Nut

More
  • Customized is Available
  • Affordable Price
  • Quality Guaranteed
  • T/T or L/C Accepted
  • Other Payment Accepted
  • Fast Shipping, Worldwide Delivery
  • 24-Hours Excellent Customer Service
  • Offer Free Fastener Solution
  • Bulk Discounts for Larger Order

Product Range

Imperial
Metrics
error: Content is protected !!