ASTM International standard

/Tag:ASTM International standard
  • Hex Bolts A307 and A307B

Hex Bolts A307 and A307B

We keeps ASTM A307 and A307B hex bolts in stock. We also stock the ASTM A563 Hex Nuts (Heavy and Finish) to go with these bolts. ASTM A307 SIZES & SPECIFICATIONS The ASTM A307 specification covers carbon steel bolts, rods/studs and anchor bolts ranging from 1/4″ through 4″ diameter. This is your everyday, run of [...]

By |October 24th, 2019|A307, ASTM International Standard, Bolt Types|Comments Off on Hex Bolts A307 and A307B
  • ASTM A325


ASTM A325 is an ASTM International standard for heavy hex structural bolts, titled Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength. It defines mechanical properties for bolts that range from 1⁄2 to 1 1⁄2 inches (13 to 38 mm) in diameter. The equivalent metric standard is ASTM A325M, which is [...]

  • ASTM A325 Specifications

ASTM A325 Specifications

ASTM A325 Specifications Prior to its withdrawl in 2016, the ASTM A325 specifications covered high strength heavy hex structural bolts from 1/2″ diameter through 1-1/2″ diameter. These bolts are intended for use in structural connections and therefore have shorter thread lengths than standard hex bolts. Refer to the Structural Bolts page of our site for [...]

By |October 10th, 2019|A325, A563, ASTM International Standard, F3125|Comments Off on ASTM A325 Specifications
error: Content is protected !!