Which materials of High strength hexagon bolts? they are made of three kinds of materials. The details are as follows:
Carbon steel: Generally, hexagonal bolt manufacturers distinguish low carbon steel, medium carbon steel, high carbon steel and alloy steel according to carbon content in carbon steel.
1. Low carbon steel C% ≤ 0.25% is usually called A3 steel in China. It is called 1008101510181022 in foreign countries. It is mainly used for grade 4.8 bolts, grade 4 nuts, small screws and other products without hardness requirements. (Note: the drill tail nail is mainly made of 1022 material. )
2. Medium carbon steel 0.25%
3. High carbon steel C% > 0.45%. At present, the standard hexagon bolt is not used in the market.
4. Alloy steel: the hexagonal bolt manufacturer adds alloy elements to the plain carbon steel, and increases some special properties of the steel, such as 35, 40 chromium molybdenum, SCM435, 10b38. Fangsheng screw mainly uses SCM435 chromium molybdenum alloy steel, the main components are C, Si, Mn, P, s, Cr, mo.
Stainless steel: Performance level: 45, 50, 60, 70, 80
Hexagonal bolt manufacturers are mainly divided into austenite (18% Cr, 8% Ni) with good heat resistance, corrosion resistance and weldability. A1，A2，A4
Martensite and 13% Cr have poor corrosion resistance, high strength and good wear resistance. C1, C2, C4 ferritic stainless steel. The forging property of 18% Cr is better than that of martensite. At present, the imported materials on the market are mainly Japanese products. It is mainly divided into SUS302, SUS304 and SUS316 by level.
Copper:
Hexagonal bolt manufacturers commonly used material for Brass Zinc copper alloy. H62, H65 and H68 copper are used as standard parts in the market.
Above are the three kinds of materials about high strength hexagon bolt introduced, we should pay attention to distinguish when purchasing.
Materials of High Strength Hexagon Bolts
DIN 931 Hex Bolt Gr.8.8 Plain
High Tensile Hex Head Bolt DIN 931 Hex Bolt Gr.8.8 Plain Material:carbon steel,alloy steel, stainless steel. Diameter : M12– M36(1/2″-1 1/2″) Length:25mm –1000mm Property class as per ISO 898:8.8-10.9,GB 1231:8.8S,10.9S,JIS 1186;EN 14399;ASTM A325/A325M,A490/A490M. High Tensile Hex Head Bolt DIN 931, DIN 933 For tension control structural series product capacity diameter from M12 to M36(1/2″-1 1/2″) DIN […]
