WINDO METAL Capabilities Threading Department In addition to All-Thread Studs, our Production Department can thread many different types of fasteners to your Customer’s specifications including: F1554 Grade 36 Double-End Studs (or Sag Rods) F1554 Grade 55 Double-End Studs (and Single-End Studs) F1554 Grade 105 Double-End Studs (and Single-End Studs) ASTM A449 Double-End Studs ASTM A193 [...]
Application: A307B Bolts are commonly used for flange joints in piping systems with cast iron flanges. A307B Bolts have a tensile strength range of 60-100 KSI. These are very similar to A307 Grade A, only the head dimensions are different; A307A uses a standard Hex head where as the A307B Bolts use a Heavy hex [...]
ASTM A193 Alloy Steel Bolts WINDO METAL Inc. is your source for ASTM A193/A320 Alloy Steel Bolts from 3/8” to 4” Diameter in a wide variety of lengths, thread lengths and finishes Hot Dip Galvanized, Mechanical Galvanized, Zinc Plated, Yellow Zinc Plated, Cadmium Plated, Yellow Cadmium Plated, Blue Xylan® , Blue Teflon®, Green Xylan®, Green [...]
We keeps ASTM A307 and A307B hex bolts in stock. We also stock the ASTM A563 Hex Nuts (Heavy and Finish) to go with these bolts. ASTM A307 SIZES & SPECIFICATIONS The ASTM A307 specification covers carbon steel bolts, rods/studs and anchor bolts ranging from 1/4″ through 4″ diameter. This is your everyday, run of [...]
ASTM A325 is an ASTM International standard for heavy hex structural bolts, titled Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength. It defines mechanical properties for bolts that range from 1⁄2 to 1 1⁄2 inches (13 to 38 mm) in diameter. The equivalent metric standard is ASTM A325M, which is [...]
DIN 6914 Hex Bolts For High Strength Struct. Bolting DIN 6914 – Hex Bolts For High Strength Struct. Bolting manufacturers & suppliers in india, Carbon Steel/ Alloy Steel/ Stainless Steel DIN 6914 – Hex Bolts For High Strength Struct. Bolting manufacturers in india ISO 9001:2008 Certified Manufacturer & Suppliers Of SS DIN 6914 – Hex [...]
ASTM A325 Specifications Prior to its withdrawl in 2016, the ASTM A325 specifications covered high strength heavy hex structural bolts from 1/2″ diameter through 1-1/2″ diameter. These bolts are intended for use in structural connections and therefore have shorter thread lengths than standard hex bolts. Refer to the Structural Bolts page of our site for [...]
Hex Nuts Products Medium-Strength Steel Hex Nuts—Grade 5 These nuts are suitable for fastening most machinery and equipment. Metric Medium-Strength Steel Hex Nuts—Class 8 Class 8 nuts are comparable in strength to Class 8.8 bolts and are suitable for fastening most machinery and equipment. Metric Fine-Thread Medium-Strength Steel Hex Nuts—Class 8 Left-Hand Threaded Medium-Strength Steel [...]
Heavy Hex Bolts are designed for use in a variety of high temperature, high strength industrial applications, such as with steel fabrication and general construction. They feature a thicker head than standard or regular hex bolts, and offer a greater bearing surface that distributes the clamping load over a wider area. Heavy hex bolts can [...]